Name: Lattice Planks Roller
Brand: HAVITA
Price: 9.99 USD
Availability: InStock

4 inch Lattice Planks clay texture roller standing beside the pattern it presses into clay

Lattice Planks pattern pressed into a clay slab

4 inch Lattice Planks clay texture roller resting on the clay slab it patterned

Size guide for the Lattice Planks clay texture roller, showing each available length with dimensions

Detail comparison: the HAVITA Lattice Planks roller has no FDM layer lines, unlike a standard printed roller

1 / 5

Texture roller

Size

Buy more, save more

Mix & match any rollers — every pattern and size in your cart counts toward the discount.

3+ rollers 5% off5+ rollers 10% off8+ rollers 15% off Applied automatically in your cart — no code needed.

Lattice Planks rolls a woven rhythm into clay, combining structured repetition with soft handcrafted character. The design makes a strong background for both simple and layered forms.

Adds textile-like depth to cuffs, pendants, tiles, trays, vessels, and slab-built forms
Use lighter or firmer pressure to adjust the depth and character of the impression
Highlight recessed details with underglaze, oxide, paint, glaze, or an antiquing wash
Available sizes: 2", 4", and 6" roller widths

Directions

Condition and flatten your clay slab to the desired thickness.
Position the roller at one edge of the slab and press both ends just firmly enough to establish the depth of the first imprint.
With hands on both ends, roll forward in a smooth, steady motion, applying even pressure so both sides rotate together.
Pause—without lifting—if you need to verify alignment, then continue rolling to the opposite edge.
As you reach the end of the slab, gradually ease pressure so the roller glides upward and off the clay for a clean release.
Rinse the roller with warm, soapy water and a soft brush; air‑dry before storing.

Pro-Tip: A channel runs through the roller—insert a dowel for extra leverage or to mount it in a handle or rolling‑pin frame if preferred.

Refunds & Exchanges

30-day returns for items in original condition (custom & final-sale excluded)
No exchanges. Report damaged/incorrect items within 30 days.

For more information, please see our complete refund policy.

Measurements

2″ roller — 2 in (50.8 mm) rolling width
4″ roller — 4 in (101.6 mm) rolling width
6″ roller — 6 in (152.4 mm) rolling width

The pattern repeats seamlessly with every rotation, so the impression continues as far as you roll.

Materials & Care

Compatible Clays

Polymer clays
Air-dry clay
Foam clay / molding foam
Modeling clays
Precious metal clay
Traditional ceramic clay

Pro Tips for Water-Softened Clays

Roll out your slab, then let the surface dry slightly before applying the roller.
For finer details, give the clay a little extra time to firm up to reduce tearing and get a more even impression.

Minimize Sticking

Use a light dusting of cornstarch (or another fine, inert powder) as a release agent between the roller and the clay.

Care of Rollers